MHD100 Hydraulic Drifter
Equivalent to Sandvik HEX1
The typical applications of the MHD100 hydraulic drifter are foundation drilling, road cutting, trenching, bolting, line drilling in dimensional stone quarries, and other specialised drilling applications. This Mindrill-made hydraulic drifter is a small yet low-profile hydraulic percussive top hammer rock drill that drills with air flushing (water flushing is optional). To lessen the risk to the environment, biodegradable oils can be used in hydraulic and shank lubrication. The maximum suggested diameter for the hydraulic rock drill MHD100 is 45 mm.
Ordering Part No.
| Part No. | Chuck Size |
|---|---|
| 5113 206 000 | 22 x 108 mm (7/8 in x 4¼ in) |
Technical Specifications:
| Weight : | 50 kg |
| Length : | 479 mm |
| Hole Diameter Drilling : | 22-45 mm |
| Power Class: | 6.5 kW |
| Shank Size : | 22 x 108 mm |
| Operating pressure Percussion : | 100 – 180 bar |
| Percussion rate : | 70 – 88 Hz |
| High pressure (HP) : | 50 bar |
| Low pressure (LP) : | 4 bar |
| Air pressure : | 3-5 bar |
| Flushing pressure (air / water) : | Max.5 bar |
| Oil consumption : | 50 – 100 g/h |
| Drill steels : | Integral rods |
| Rotation motor type : | OMM32 |
| Filling valve : | Vg8 DIN7756 |
| Accumulator gas : | Nitrogen N2 |
Key Features
- Built-in air flushing (water flushing optional)
- Compact size and low profile height
- Biodegradable oils can be used to reduce environmental impact
- Ideal for heavy-duty DSI drilling applications including foundation drilling,
road cutting, trenching, bolting, and line drilling in dimensional stone quarries - Parts interchangeable with Sandvik HEX1 Hydraulic Drifter
Our Certifications
FAQ’s
Yes. The MHD100 hydraulic drifter is designed as an equivalent to the Sandvik HEX1 class hydraulic rock drill and can be used on compatible drill rigs with similar mounting arrangements, hydraulic connections, and feed beam systems.
Email: salessupport@mindrill.com
Email: salessupport@mindrill.com
The MHD100 hydraulic drifter is recommended for drilling hole diameters up to approximately 45 mm, depending on the drill bit type and rock formation.
No, the MHD100 operates with built-in air flushing as standard. Water flushing is optional and may be used when dust suppression or improved hole cleaning is required in specific site conditions.
The drifter requires clean, properly filtered hydraulic oil and regular shank lubrication during operation. Routine inspection of wear parts, correct pressure settings, and timely replacement of consumables such as seals and bushings help maintain drilling performance and extend service life.
The MHD100 is widely used in:
- Stone quarrying & dimensional stone cutting
- Construction & infrastructure projects
- Mining & tunneling operations
- Civil engineering and foundation work
Related Products
| Weight : | 53 Kg |
| Length : | 488 mm |
| Drill Hole Diameter: | 22-45 millimeters |
| Power Class: | 6.5 kilowatts |
| Handle Size : | R23/R25/R28 |
MHD100X
| Hole Diameter Drilling: | 22 – 45 mm |
| Percussion Power: | 7 kW |
| Percussion rate : | 65 – 85 Hz |
| Percussion pressure: | 100 – 180 bar |
MHD106
| Weight : | 175 kg |
| Length : | 1008 mm |
| Width including connectors : | 251 mm |
| Height: | 223 kW |
| Height over drill center : | 88 mm |
MHD1838HD+
| Weight : | 210 kg |
| Drilling Hole Diameter : | 43 -64 mm |
| Reaming Hole Diameter : | 76 -127 mm |
| Power Class: | 20 kW |
| Percussion Rate : | 67 Hz |
MHD5
Lang »
Download Products Catalogue
Rock Drills