| |
Underground Mining Tools |
|
|
| |
|
|
| |
|
|
|
| |
Air Mover |
|
|
| |
Air Movers manufactured by MDS are ideal for underground mines, shaft sinking and tunnels.
Technical Data:
- Working pressure : 50-70 psi
- Air Consumption : 70-80 cfm
- Discharge : 20 feet [6 mtrs.]
|
|
|
|
| |
|
|
| |
|
Metric Description
|
|
| |
|
|
|
| |
Cement Injection Pump |
|
|
| |
Feature
- Spray with high pressure.
- Trouble free installation at any place.
- Fully safe to use.
- Light weight.
- Very few screws.
- Low maintenance.
|
|
|
|
| |
| Main Applications (Mines) |
| 1 |
Roof Bolting & Cable Grouting Fully Grouted Bolts & anchors installed by pre-grouting or post injection. |
| 2 |
Long hole grouting from 3m to 20m, can be injected with cementations or other mixer (Water based resins etc.) in ratio of 1 : 0.00 up to 1 : 2. |
| 3 |
Ventilation control by spraying on to walls and prefabricated meshes. |
| 4 |
Injection of Grouts - set props with a modification to produce high pressure setting up to 500 PSI |
| Civil Engineering & Constructions |
| 1 |
Cavity injection - Particularly where ground is sensitive, this pump gives a high degree of operator control. |
| 2 |
Very low water / cement ratio mixes. |
| Chemical & Technical Industries |
| 1 |
Pumping any liquid or viscous material especially in hazardous atmosphere. |
| Weight |
22 Kg |
| Total Height |
44" |
| Width & Length |
24" x 8" |
| Air Pressure |
90-100 CFM at 70-80 PSI Pressure. |
| Total Head Required |
3M - 20 Metre |
| Bottom Feed |
No Hopper or suction pipe needed, No Air Interference. |
| Special feature: |
|
| * Only one value Operation - for Complete & Perfect Control. |
| * Allen Screwed Main Parts, Slurry Section can be opened Quickly in case of any Blockage. |
| * All Major Parts are constructed of Stainless Steel & Rust Proffed Electrically Galvanized Treated. |
| * Air Functioned Pump with all active parts fitted inside only. |
| * A special grout mixer including 2no drums of 75 litres capacity with mixing blades, air motor and torque multiplying speed reduction gear box. | |
|
| |
|
Metric Description
|
|
| |
|
|
|
| |
Cross Bit Grinder |
|
|
| |
|
|
|
|
| |
|
Motor |
Main motor 5 HP. 1440 RPM V,50 HZ, 3 Phase, Make NGEF-FLANGE type. |
| Wheel |
300 x 40 x 50 39 C 60 V Shape for 110 degree |
| COOLANT TANK |
Water Spray for wheel & dresser. |
| Spindle |
Main spindle fitted with 2 straight roller bearings and 2 ball bearings, fitted with hardened and frinded wheel flange. |
| Safety Guard |
Wheel guard - Dual side |
| Starter |
DOL starter for motor and rotary switch for coolant motor. |
| Cross slides |
Mail cross slide for bit forwrad and reverse. Small slide for cros bit centering and small slide for dresser forward and reverse. |
| Coolant Tank |
Water capacity 40 ltr. Fitted with dust separator. |
| Bit holder |
For R 32 Rope Thread - Four side changer for Grinding Cross Bit. |
| Dimension |
36" x 36" x 40" Height |
| Weight |
300 Kg.
| |
|
| |
|
Metric Description
|
|
| |
|
|
|
| |
Exhuast Fan |
|
|
| |
Feature:
- For underground mines
- Shaft sinking & tunnels.
- 4000 RPM
- Discharge 2000 CFM at 200 meter length with 100 mm w.g.
- Working at 70 - 80 psi
- Air Consumption 100 cfm
|
|
|
|
| |
|
|
| |
|
Metric Description
|
|
| |
|
|
|
| |
Telescopic Stopper |
|
|
| |
Feature:
· Air Leg Pusher, Stopper &Telescopic Stopper
- A rigid steel Pneumatic jack for all drills.
- Maintenance free ,single valve operation.
Feed 36",52",331/2" & 1 mtr. Double feed telescopic |
|
|
|
| |
|
FEATURES |
AIR LEG |
AIR LEG |
TELESCOPIC |
|
PUSHER |
STOPPER |
STOPPER |
|
Over All Weight |
22 Kg. |
20 Kg. |
25 Kg. |
|
Working Pressure |
5-7 Kg./cm2 |
5-7 Kg./cm2 |
5-7 Kg./cm2 |
|
Air Consumption |
15 CFM |
10 CFM |
20 CFM |
|
Cylinder Size |
2½ |
2½ |
2¾ |
|
(63.5 mm) |
(63.5 mm) |
(70 mm) |
|
|
|
3¼ |
|
|
|
(82.5 MM) |
|
Machine Fitment |
UNIVERSAL MACHINE MOUNT |
DIRECT MOUNTING |
DIRECT MOUNTING |
|
Driling Position |
HORIZONTAL ANY ANGLE |
UP RIGHT VERTICAL |
VERTICAL IN LOW HEIGHT | |
|
| |
|
Metric Description
|
|
| |
|
|
|
| |
Pneumatic Power Pack |
|
|
| |
· Vane Type Air Motor, Radial Piston Pump with filter
· Air pressure 6 kg cm / bar / 80-90 CFM
· Hydraulic Pressure Developed -500 kg/cm/Bar
· Capacity to Shift -200 ton Marble Block
· Oil Capacity -25 lt. ,Flow -1.5 LPM
· Weight in Dry Condition -65kg |
|
|
|
| |
|
|
| |
|
Metric Description
|
|
| |
|
|
|
| |
1 |
|
|
