MDS PNEUMATIC TOOLS (P) LTD

PRODUCTS
MDS-250 series Drills

Hand Held Rock Drill

Pusher Leg Rock Drill

Simba Junior

Drifter

Cavo Loader

Breakers

Pneumatic Raise Climber

Grinders

Sump Pump

DTH Hammers

Airline Lubricator

Barrel Pump

Air Line Accessories

DTH Button Bits

Breaker Accessories

Shank Adaptor and Coupling Sleeves

Wedges & Feathers

Double Diaphragm Pumps

Underground Mining Tools

Spare Parts

Simba Junior

Simba Junior ring drilling rig is a high productive long hole drilling arrangement at a low investment. This is a simple; one man operated rig, patterned to produce blast holes around 360 degrees. Hole patterns may be drilled vertically or inclined as required.

The complete Simba Junior includes MDS 120F Drifter, complete Remote Control system, BSP-10 Drill Steel Support, BMS-46 Feed Beam and feed motor.

Please view our spare parts section or download attached pdf file for all parts of Simba Junior viz Screw Feed Beam (Suitable for BBC-120 Drifter) - BMS 46, BMS 48, BMS 812.,Pneumatic Drill Steel Support (Rod Catcher) - BSP 10,Cradle for BBC-120F, Remote Control, Motor Housing Complete, Feed Screw, Bearing Casing Top & Bottom

http://www.mindrill.com/Spare_Parts.php

Diameter of Hole	48-57 with Cross Bit
Hole Depth of 1.2 mtr. each	Up to 25 mtr. by 32 mm extension rod of 1.2 mtr. each.
Hole Direction same hole	Vertically upward & capable of doing same hole in 360 Degree direction, by help of graduated ring frame.
Compatible Drifter	MDS 120 F
Air connection for Drifter	38 mm
Air connection for reverse / forward	12 mm
Air connection for water flushing	20 MM
Air connection for Rod Catcher	10 MM
Feed Mechanism	Material – Steel graded casting for ling life & less wear and tear and less thread failing length: 1760 mm;, equivalent to BMS-46 model to accommodate 1.2 meter of R 32 mm Dia Drill rods.
Feed Mechanism
Guide Rail	Steel single piece 'F' type design with bolt & nuts
Lateral movement (Optional)	By manual feed screw of 54 mm to travel the feed beam in either direction up to 550 mm from centre. For doing upward hole at 3 positions without shifting the complete machine.
Lateral movement (Optional)
Mounting	Ø Hollow MS Pipe collapsible type mounting
	Ø Easily assemble & dissemble in underground mines.
	Ø Full system can be angled into all direction as the Drifter, Feed Beam and rod catcher will be mounted on a ring frame.
Remote	Equipped with Remote Control
Cradel	Steel casting with 2 clamps & nut bolts to hold 120 F drifter.

Features

Ø Rotation possibility of 360 Degree for easier Drilling at your desired angle.

Ø Capable of Drilling up to length of 25 Mtr. with Hole Dia. Of 51 to 57 mm

Ø Just takes approx. 4 minutes for drilling 1 meter.

Ø Heavy Duty Pneumatically operated Rod Catcher

Ø Inbuilt Oil Lubricator & control of oil flow.

Ø Air Consumption – 350 cfm Pressure – 6 to 7 kg/cm2

Ø Net Weight. 1200 Kgs

Ø Dimensions (in mm) :(L x W x H)

o 1) With closed column bar - 1780 x 1550 x 2600

o 2) With Open column bar - 1780 x 1550 x 3300

Metric Description

1024 x 768